-
Forward Lighting
-
Exterior Lighting
- Back Up Light Bulb » 921
- Daytime Running Light Bulb » 9005
- License Plate Light Bulb » 2825
- Parking Light Bulb » 2827
- Side Marker Light Bulb Front » 2827
- Turn Signal Light Bulb Front » 7440A
- Turn Signal Light Bulb Rear Hybrid » 7440A
- Turn Signal Light Bulb Rear LE » 7440
- Turn Signal Light Bulb Rear SE » 7440
- Turn Signal Light Bulb Rear XLE » 7440
-
Interior Lighting
2011 Toyota Camry Headlight Bulb Size
The 2011 Toyota Camry sits at the tail end of the sixth-generation XV40 platform, the car that cemented the Camry as America's best-selling sedan for over a decade. The 2011 toyota camry headlight bulb size is H11 for the low beam and 9005 (HB3) for the high beam, with H11 bulbs also used in the fog light position. These factory halogen bulbs delivered acceptable output when the car was new, but after years on the road the difference between stock halogens and modern 2011 toyota camry led headlights is night and day.
The XV40 Camry was built to be an appliance -- dependable, efficient, invisible. Toyota's legendary reliability means plenty of these sixth-gen models are still racking up daily commute miles. Upgrading the headlights is one of the most effective ways to modernize an aging Camry without touching the mechanicals.
Best LED Headlight Upgrade for the 2011 Toyota Camry
LED conversion kits are the top recommendation for 2011 Camry owners who want brighter, whiter light without complicating the installation. The H11 LED bulb drops directly into the existing low beam housing -- pull the old halogen out, plug the LED in, and secure the compact driver behind the assembly. Total install time runs about 15 to 20 minutes per side, and you get an immediate jump to a crisp 6000K white output with zero warm-up delay.
HID kits remain a strong choice if you want the absolute maximum throw distance from your projector housings. Each bulb pairs with a slim ballast that tucks into the engine bay, adding roughly 10 extra minutes to the job. Once lit, the xenon arc produces a dense, far-reaching beam that halogen simply cannot match.
Every HID Nation kit ships free and is protected by a lifetime warranty. If a bulb or ballast ever fails, we replace it at no cost.
Frequently Asked Questions
What bulb sizes does the 2011 Toyota Camry use?
The 2011 Toyota Camry uses an H11 bulb for the low beam, a 9005 bulb for the high beam, and an H11 bulb for the fog lights. All three positions run halogen from the factory and can be upgraded to LED or HID.
Will LED headlights work in the 2011 Camry's projector housing?
Yes. The 2011 Camry uses halogen projector housings on all trims. LED conversion bulbs are designed to sit in the same focal point as the original H11 halogen, so the beam pattern stays properly focused. No housing swap or retrofit is required.
Does the 2011 Camry Hybrid use the same headlight bulbs?
It does. The 2011 Camry Hybrid shares the same headlight housing and bulb sizes as the standard gasoline model -- H11 low beam, 9005 high beam, and H11 fog light. Any kit that fits the regular 2011 Camry will also fit the Hybrid.
Do the 2011 and 2012 Camry use the same headlight bulbs?
Both the 2011 and 2012 Camry use H11 low beam and 9005 high beam bulbs. However, the fog light bulb changed when Toyota moved to the new XV50 platform for 2012. The 2011 model uses H11 fog lights, while the 2012 and newer seventh-gen models switched to H11 fog lights as well before eventually moving to H16 in 2015.
How bright are LED headlights compared to the stock 2011 Camry halogens?
A quality LED conversion kit typically produces two to three times the usable light output of a factory H11 halogen bulb. The color temperature shifts from the warm yellow of halogen to a modern 6000K white, which improves contrast and helps you spot road hazards earlier on dark commutes.